How can vinegar and baking soda help clean your bathtub at home?

Few modern housewives know that you can clean your bathtub with soda and vinegar until it is perfectly clean in just a few minutes. Unpleasant yellow stains are familiar to everyone, no matter how well and thoroughly the surface is cleaned. Getting rid of this problem is much easier than it might seem. Today, with the help of ordinary soda and table vinegar, you can get rid of unpleasant plaque in a matter of minutes.

Secrets of successful cleaning: what do you need to know about alkali in the household?

Cleaning the bathtub is an activity that does not bring joy, since it involves strong-smelling substances, but today baking soda came to the rescue of the housewife. This element comes in two types:

• food;
• calcified.

Baking soda is used in cooking to quench excess acidity or is used as a leavening agent for dough. Soda Ash – the alkali is much more concentrated. That is why it will easily clean the surface of grease, and the plaque that forms in the bathroom will not resist its force.

Calcined soda can easily be washed on any surface, be it a sink, bathtub or toilet; it is sold exclusively in hardware stores, since this type of soda cannot be consumed as food.

Important!

Before you begin the cleaning process, you need to determine the degree of contamination. When using soda ash, you must wear special gloves, otherwise irritation may occur on the skin of your hands.

Bathtub cleaning: degree of soiling

The bathtub is used frequently at home, so it needs to be cleaned at least once a week to maintain a pleasant appearance. Everyone knows that the more often you clean, the easier it will be to get rid of smudges, but sometimes there may be particles of dirt and rust in the water supply - all this remains on the surface. If you only need to clean a little, you can use simple baking soda. In order to create the substance used for the work, you need to mix a little soda, vinegar and mix. At home, you can use a soft sponge or a regular toothbrush as a cleaning tool. The composition should be applied to the dirt and left for some time, about 30 minutes, then clean the surface by wiping with light movements. Finally, you will need to wash off the remaining mixture with water. If you do such cleanings regularly, the bathtub will always be clean, and you won’t have to use a calcined one at all.

Surface whitening: vinegar and lye for heavy deposits

Cleaning a heavily soiled bathtub at home is a real challenge, but using baking soda and vinegar can quickly get the job done. It is important to remember here that you will have to use soda ash, as it is more powerful.

Recipe for making a cleaning product: equal parts baking soda and soda ash, bleach and vinegar.

Rub the resulting mixture onto the contaminated surface and then leave for 20 minutes. During this time, in order to clean the bathtub more efficiently and quickly, you will need to make a “wash” of bleach and vinegar mixed together in equal parts.Pour this liquid over the previously applied composition and leave for another 30 minutes. Use a soft sponge to clean the surface, then rinse off any remaining product thoroughly using warm water. The composition is easy to clean, so there will be no trace of soda and vinegar left in the bathroom.

Van cleaningWe are also produced using a composition of laundry soap with alkali.

Important!

You can use soda ash only for an iron or cast iron bathtub without a plastic insert.

You can clean a cast iron bathtub with the following composition:

• crushed laundry soap without additives;
• soda ash;
• ammonia.

Soap and lye - in a ratio of 1:1, ammonia - 3-5 drops. The mixture is diluted with a small amount of warm water and applied to the surface. After 120 minutes it can be washed off.

Need to clean the bathtub

Cleaning the surfaces of plumbing fixtures using a variety of products is an essential part of maintaining hygiene. Regular soda will help you achieve the ideal, as it can easily clean the surface of harmful microorganisms. Plaque that forms from time to time can be easily eliminated if it is not allowed to increase. If you carry out prevention, you won’t have to buy not only expensive products, but also water filters.

Caustic and expensive products will be a thing of the past if you use affordable products - baking soda and vinegar. Thus, you should sometimes check your kitchen cabinet's supplies or purchase soda ash from the store to quickly clean not only your bathtub, but also your sinks. In addition, timely cleaning with soda saves time, money and effort, and also does not cause burns if it comes into contact with the skin or allergies, but it is still recommended to use gloves.

It is important to remember that the presented bath bleaching methods should be applied exclusively to iron or cast iron structures, since modern plastic inserts are sensitive to aggressive substances. Soda, vinegar and other similar ingredients will quickly damage the insert, and some bathtubs will become completely unusable. The effectiveness of soda and vinegar has been proven, since more than one generation of housewives have used such mixtures. Now you can maintain the perfect whiteness of all surfaces in the bathroom without using harmful chemicals.