How and with what to wash bitumen from a car with a ready-made product that is easy to find at home

The most common and unpleasant problem that vehicle owners have to deal with is bitumen particles stuck to the body. Action must be taken immediately. Washing bitumen from a car that has been frozen for a long time is problematic. But despite this, it is quite possible if you know what methods to use.

Basic rules for removing bitumen stains

If traces of bitumen, tar or resin appear on the body, you need to adhere to the main rule - you cannot scrape it off, only dissolve it. Of course, you can try to scrape off the stains, but you just need to be prepared for the fact that the paintwork will be damaged, which will lead to expensive repairs. It is important to use compounds that remove dirt and do not harm the body.

Advice! It is much easier to remove traces of bitumen in hot weather than in cold weather.

Top 7 products for removing bitumen from a car

Kerosene

Kerosene is suitable only if you need to remove fresh bitumen traces from the vehicle body, but it will not cope with dried and old stains.

The algorithm of actions is as follows:

1. With pure kerosene, you need to thoroughly moisten a car wipe or soft sponge. It won't hurt if you pour kerosene on the body of the car; everything will be fine with the paintwork.
2. Rub the existing traces of dirt well with a napkin, then leave for about 5 minutes.
3. After the specified period of time, you need to rub the stain well for several minutes - 2-3.
4. After this, you need to take a dry rag and wipe the kerosene stain well.
5. This procedure must be repeated several times, since the contamination will not go away on the first try.

Attention! The principle of operation of kerosene is in many ways similar to gasoline, but it evaporates much more slowly, which is the reason for its effectiveness. After cleaning the car with this method, greasy marks remain that will have to be washed thoroughly.

Petrol

To remove traces of bitumen from the body, gasoline is excellent. However, for these purposes it is recommended to use only a pure composition, which will avoid harming the paintwork.

The algorithm of actions is as simple as possible:

1. Take a napkin, preferably if it is specially made for automobile use, and soak it thoroughly in pure gasoline.
2. Apply the stain to the area and begin rubbing with light movements.
3. Leave for a few minutes - no longer is necessary, since gasoline evaporates quite quickly, as a result of which such cleaning will not have any effect.
4. After this, you need to saturate the napkin with gasoline again and begin to rub the stained areas. It is not recommended to press hard, as there is a high probability that the paint will be damaged.
5. If necessary, the procedure is repeated several times until the desired result is achieved.

Attention! After traces of bitumen are removed with gasoline, the vehicle must be thoroughly washed, since gasoline is an explosive flammable material.

Diesel fuel

There is another way to remove traces of bitumen from the body of a vehicle - using diesel fuel. As you know, diesel fuel is an analogue of gasoline. It is for this reason that the algorithm of actions is no different - the procedure is exactly the same. However, there is one exception. The evaporation process of diesel fuel occurs much more slowly, so it can be left on the vehicle body much longer - up to 10 minutes.

In addition, diesel fuel is completely safe for body paint and quite effectively dissolves fresh bitumen traces. After cleaning using this method, you need to understand that the body will become quite greasy and you will have to work hard to wash off its remains.

Sunflower oil

As everyone knows, in some cases not only special means are suitable, but also traditional methods, the effectiveness of which can also be quite high. You can remove bitumen stains using sunflower oil.

Step-by-step algorithm for performing the procedure:

1. The first step is to heat the surface of the vehicle, which will allow the vegetable oil to spread much better and easier.
2. Oil is applied to contaminated areas using cotton pads or a piece of rags.
3. In order for sunflower oil to saturate the bitumen much faster and get under it, you need to make some effort.
4. Once the dirt has been removed, the oil is thoroughly wiped off with a clean, dry cloth.

It is best if the vehicle is washed with shampoo.Plain water will not get rid of oil traces.

White Spirit

As for the composition of the popular white spirit product, it is as close as possible to kerosene. As practice shows, it saturates marks quite well, evaporates slowly and does not damage the paintwork.

The step-by-step algorithm of actions is as follows:

1. The first step is to wash the vehicle thoroughly; there should be no dust or dirt on it. If there are foreign contaminants on the body, this can harm the cleaning process.
2. You need to wait until the car body is completely dry.
3. You will need a tampon made of foam rubber or cotton wool. It is thoroughly soaked in the product. Wait a few minutes - during this time the tampon should be well saturated.
4. Without unnecessary effort, as carefully and smoothly as possible, you need to wipe away traces of bitumen.

If the desired effect is not achieved the first time, then you need to repeat the procedure again.

Bitumen stain cleaner Eltrans

Eltrans EL-0301.03 is a budget product for removing bitumen and tar from car bodies. Russian manufacturer. The composition is sold in the form of aerosols. One of the advantages is that there is no sharp or unpleasant odor. In addition, Eltrans copes well with tar deposits. Thanks to the use of this product, you can effectively clean not only the body, but also the wheels from traces. The drug is completely safe for paintwork, plastic, chrome, rubber.

Resin remover Astrohim

Astrohim AC-395 is a universal cleaning product from a Russian manufacturer.With its help, you can effectively get rid of traces of bitumen, tar, tree resin and other contaminants that may get on the vehicle body.

The composition is quite liquid, it cannot linger on surfaces for a long time, but it is able to penetrate very quickly into the most inaccessible places. To achieve results, just apply the composition for a few minutes. Astrohim AC-395 is an excellent combination of high quality and affordable price.

Questions and answers

Is it possible to remove tar from a car yourself:

Yes it is possible.

How to remove tar correctly so as not to damage the body?

The first step is to treat the area where the tar has fallen - with a special product or solvent.

After applying the cleaning composition, wait 5-7 minutes.

Remove residues with a napkin or soft cloth.

If nothing worked the first time, repeat the procedure again.

How to remove traces of resin from vehicles?

To remove stains from tar and bitumen without damaging the paint on the body, it is recommended to use gasoline or ammonia. You need to wet a rag and apply it to the stain. Every 5 minutes, remove dirt using a cotton pad and cover with a rag.

If the body is hot, can tar and bitumen stains be removed from it?

As practice shows, these contaminants are much better removed from a heated body. But since volatile solvents evaporate very quickly, you need to drive the car into the shade and let it cool a little.

For what reason is bitumen not removed from the body?

Resinous compounds are able to penetrate into existing microcracks and pores, from where it is extremely problematic to remove.In this case, you will need to use strong chemical compounds that are guaranteed to give results. To avoid damaging the car, it is important to strictly follow the instructions.