Second life of a bottle: why do you need a dispenser and how to remove it?

The dispenser on alcohol bottles does not allow them to be reused. Meanwhile, such containers are very attractive for storing homemade drinks, tinctures, and various oils. There is an easy way to remove the dispenser from the bottle, so don't rush to throw away the pretty container.

Where to begin

A dispenser on a bottle of vodka or whiskey allows you to conveniently pour drinks into glasses. It is usually made of plastic. The item works like a valve: it’s easy to pour the drink out of the bottle without anything getting inside. This element protects customers from counterfeits and facilitates the process of filling glasses.

Original bottles from Jack Daniels and other designer containers can be easily adapted for homemade liqueurs, as well as used for decorative purposes. Simply remove the plastic element from the neck.

It is important to act carefully so as not to break the glass container.

How to remove the dispenser: methods

The dispenser is plastic, which means it can be steamed.

How to remove a cork from a bottle, procedure:

1. Pour water into a small saucepan and bring almost to a boil.
2. Remove the aluminum trim from the neck.
3. Place the bottle in the water upside down.
4. Soak for a few minutes in hot water until the cork softens.
5. Wear oven mitts to avoid getting burned! Carefully remove the dispenser from the neck.

If you can’t pull it out with your hands, use the blunt blade of a knife as a lever: pick up the edge of the dispenser and, leaning on the neck of the bottle, push it forward.

purity-en.htgetrid.com magazine points out that the dispenser easily returns to its place after refilling the bottle. It will fit just as tightly as before removal. Only after several procedures with boiling water can the material deteriorate.

What to do if the dispenser is installed inside the neck and it is impossible to pick it up with your fingers? And in this case there is a way to get rid of it:

1. Prepare a strong metal hook.
2. Fill the heating pad with hot water and wrap it around the neck of the container.
3. Support the structure with a towel.
4. After a few minutes, hook the dispenser and pull it out forcefully.

Some ball dispensers from imported bottles of tequila, absinthe, etc. cannot be picked up either by hand or with a hook. In this case, just use a knife: cut the element inside the neck and remove it in parts. It will not be possible to reinstall the dispenser.

Particularly confused people have adapted to pouring drinks even through a dispenser. If it is possible to remove the valve from a beautiful bottle, then it is better to do this: it will be faster and more accurate.