Wurth rust converter: principle of operation, instructions for application and features of painting treated surfaces

Wurth Converter is an effective rust remover. It is often used for cosmetic and major car repairs. Unlike other products of this type, the Wurth converter has a complex effect, incl. dissolves the corroded layer of metal and eliminates rust stains, and also degreases the treated area.

In addition, this product is capable of converting a layer of corrosion into a special protective coating with high adhesive properties.

What is Wurth and how it works

Wurth is a highly active rust converter that transforms metal oxide into soil. The use of this product stops further destruction of the material. The drug is prepared on a dispersion basis. It contains no harmful compounds that can pollute the environment.

The operating principle of this rust converter is quite simple. The active substances present in this product react with iron oxide. The formed soil adheres firmly to the metal base. The treated area is well protected not only from further corrosion, but also from the influence of environmental factors.

This product can be used to remove corrosion from painted areas. It does not react with paint.It can be used in cases where you need to get the most clean, grease-free surface possible. The Wurth converter is recommended for use in preparing the damaged area for further painting.

Advice! Before using this product, it is extremely important to thoroughly prepare the surface. This will facilitate better penetration of the active substances into the corroded layer and give a better effect.

When the soil is formed, the treated surface changes color. It takes on a blue-black hue. The surface then hardens. Until this process is completed, do not wash the surface or rub it with a cloth.

Application area

This rust destroyer is recommended for removing corrosion from any metal surfaces. It is most often used when carrying out car body repairs. In addition, it can be used to unblock threaded connections that have undergone oxidation. It is allowed to use the Wurth converter for processing moving and stationary parts of equipment. You can use the product to get rid of traces of corrosion on metal structures. In addition, this converter can be used when carrying out repairs and restoration of metal objects.

Instructions for use

The solvent can contains detailed instructions for using this product. It is extremely important to familiarize yourself with it in advance and strictly follow the manufacturers’ recommendations. The treatment procedure should begin with thorough surface preparation.

If corrosion has severely damaged the metal, it must be thoroughly cleaned with sandpaper, a scraper or a brush. Then you need to rinse the surface to be treated thoroughly to remove all solid particles of dirt.Before using the rust converter, you must wait for the cleaned area to dry.

In addition, please note that you should not use a rust converter that has been stored in unsuitable conditions. Significantly reduce the effectiveness of the freezing agent. This rust converter should not be used in hot sunlight. Do not apply it to a hot surface.

It is recommended to use this product at a temperature of at least +10 °C. When working with Wurth, it is imperative to use personal protective equipment, incl. You will need goggles, closed clothing and gloves. Contact with eyes or skin may cause irritation.

How to apply

The process of using Wurth rust converter includes the following steps:

1. Shake the container with the product thoroughly and then open it.
2. Use a small roller or brush to thoroughly treat the surface or spray if the product is packaged in a can.
3. Check that the treated area is well moistened by the converter.
4. Leave the product on the surface for at least 3 hours.

After completing the work, it is recommended to thoroughly rinse the equipment with water. Please note that painting should be done no less than 48 hours after corrosion removal procedures.

Do I need to wash it off?

After applying the converter, a chemical reaction begins that can last several hours. The product should not be washed off, because this may negatively affect the result. Moreover, if unwanted splashes get on the surrounding surface, they can be eliminated with methylated alcohol.

Painting after Wurth

Surfaces that have been treated with Wurth rust converter must be painted to protect them from contact with oxygen. It is best to use polymer or paint materials with a low zinc content for painting. Before painting, you must thoroughly wipe the surface with a clean rag to remove the loose layer. If the treated area is large, you can wash it with warm water and soap and then dry it. This will remove any solid particles that may remain. After this, you can begin painting the prepared surface.

The paint can be applied either with a spray gun or with a regular brush. The appropriate tool depends on the type of product being painted. Often paint needs to be applied in several layers. In this case, each layer must be allowed to dry. This will provide better results. At the same time, you should not apply too thick a layer of paint, because... this will increase the risk of it peeling off.