home · Adviсe ·

Not on sale or expensive - make a pool filter from padding polyester in 30 minutes!

Dirty pool water is a good reason to think about changing the filter cartridge. But what if you didn’t find it in the store? The answer is to make a pool filter from padding polyester with your own hands.

Frame pool on site

How do you know when it's time to replace your pool filter?

The filter pump does a good job of cleaning the pool water until the filter material inside becomes clogged. This can be understood by the speed and quality of water purification. 1.5 to 6 hours pass and the water in the pool is still dirty? This means it’s time to take out the cartridge and rinse it under high pressure of water.

But these measures soon become insufficient. The fact is that the filter material becomes clogged over time and ceases to perform its function. The manufacturer Intex recommends replacing the cartridge every 2 weeks.

Used pool filter cartridge

Making a filter with your own hands is not a problem

Due to the coronavirus outbreak, there are supply disruptions across the world for a wide range of goods. Particularly frustrating is the shortage of inexpensive products from China, which make up 50% of the Russian market.

You can increasingly hear from sellers that they have not received filter cartridges. Therefore, craftsmen have long found a way to do without purchasing new cartridges.

Sintepon

Homemade filter in 30 minutes

The method presented below is the easiest and allows you to return the filter to its former efficiency in just half an hour. In this case, significant investments are not required.

For a homemade filter you will need:

  • sheet (roll) padding polyester with a density of 200 g/m2 – a segment of 20 by 100 cm;
  • stationery knife;
  • flexible wire;
  • awl;
  • pliers;
  • rubber bands for money – 5–10 pcs.;
  • old cartridge.

Sintepon instead of a filter is used quite often. The material consists of the finest hairs intertwined with each other. They collect suspended matter, debris and dirt, and do not retain liquid. Sintepon is also called synthetic wool. It is easy to wash, does not rot, and practically does not come off.

How to make a filter with your own hands:

  1. Cut off the old filter paper with a utility knife.
    Removing filter material from the cartridge
  2. What remains is a plastic mesh sleeve and 2 silicone rings.
    Pool filter cartridge parts
  3. We attach the rings to the sleeve with flexible wire. We punch holes with an awl, insert the wire and bend around the mesh of the sleeve. Punch a hole again and make a stitch. We tighten the wire with pliers.
    Fastening cartridge parts with wire
    Assembling the pool filter cartridge frame
  4. We wind a piece of padding polyester around the resulting skeleton of the cartridge. Secure with rubber bands.
    Winding padding polyester onto the frame of a pool filter cartridge
    Attaching the padding polyester to the filter cartridge

Questions and answers

How long does a padding polyester filter last?

According to reviews, a filter made of padding polyester does an excellent job of purifying water for a month. After this, the material does not look its best. It also needs to be periodically removed and washed (after 4–12 hours of pump operation).

How to wash (wash) padding polyester?

To clean the material, simply rinse it in a bowl of clean water. You can add detergent. It is not recommended to twist the padding polyester too much and wash it in hot water (temperatures above 30–40 degrees are contraindicated for synthetics).

Having your own swimming pool has long ceased to be a luxury. Inflatable, frame and frame-inflatable models can be afforded by, if not all, then many residents of Russia.But purchasing just one case is not enough. To ensure that the water remains clean, does not become cloudy or blooms, it is necessary to use a filter pump.

According to the rules, the filter cartridge must be cleaned daily. With this care it will last 2 weeks. After this, the part must be replaced. But many do differently. Why look for cartridges that are in short supply today, if you can buy sheet synthetic padding polyester for 50 rubles at any sewing store? It copes with water purification no worse than special paper on a cartridge. Cut off the “original” filter. Secure the silicone pads to the ends of the sleeve with wire. You will get a skeleton on which you can wrap strips of padding polyester, easily remove them, wash them, or simply throw them away.

How often do you change the cartridges in your pool filter?
  1. Sergey

    Interesting way. I'll take note.

Cleaning

Stains

Storage