Is it possible to wash an acrylic bathtub with Sanox: let’s understand the issue

Is it possible to wash an acrylic bathtub with Sanox? What cleaning products for this material are considered safe? Let's consider all the rules for cleaning acrylic.

Features of an acrylic bath

Acrylic is a popular polymer material for plumbing. Such baths have both advantages and disadvantages. These are very aesthetic, easy to install, non-massive and convenient plumbing items. But when the need for cleaning arises, acrylic becomes a problem for housewives who are accustomed to “scrubbing” using aggressive means.

Important
Acrylic does not tolerate "radical measures", but if you regularly wipe it with a damp sponge, it will remain beautiful for many years.

Acrylic does not absorb dirt due to its reduced porosity - all dirt remains on the surface. Smoothness also ensures a low degree of penetration of harmful microorganisms into the structure.

Disadvantages of acrylic:

1. Over time, yellow discoloration appears from dirty water.
2. Possible short-term staining.
3. To avoid limescale deposits, you have to wipe the material dry after use.

How to wash with Sanox: instructions

"Sanox" is a popular and inexpensive cleaning product with a whitening and disinfection effect. Sold in spray, gel and foam form. All of them are acceptable for use on an acrylic bathtub.

Cleaning instructions:

1. Apply Sanox gel to a soft cloth or sponge. Spray the spray at a distance of 10 cm.
2. Treat the entire surface and leave the product for 10 minutes.Additionally, wipe everything with a sponge without any extra effort.
3. Rinse off Sanox thoroughly with warm water.

Advice from purity-en.htgetrid.com magazine: do not use hard, metallic sponges or brushes. They damage the acrylic structure.

How to clean an acrylic bathtub without harm to the surface structure? Regular soap will do: rub a soft sponge with it and walk over the surface. Among the folk remedies for acrylic, solutions of citric acid and sting are safe. As an alternative, use dishwashing gels and baby shampoos.

Advice
To add shine to acrylic, buff it in a circular motion with a wax-based polish.

Attention! What should not be cleaned:

1. Chlorine-containing products.
2. Highly abrasive powders, both washing and cleaning, like Pemolux.
3. Ammonia-based products.
4. Solvents: acetone, gasoline, etc.
5. Formulations with formaldehyde.

Clean the acrylic bathtub with water or soap daily after use, and use Sanox once every 2 weeks. Treat your plumbing with care, and it will delight you with its cleanliness for a long time.