How to hide the wires from the TV on the wall: put it out of sight or turn it into an interior detail?

When you search for “hide TV wires on the wall,” the Internet will return up to a hundred different ideas with photos and step-by-step instructions. After analyzing all the options, we decided to separate the wheat from the chaff and describe only the safest and most aesthetic methods. Most of them are easy to implement and do not require large financial investments.

How to hide wires from your TV: 5 ways

Wall mounting of the TV is suitable for any interior and allows you to save space in the room. The only thing that disrupts the aesthetics is the hanging wire or wires.

It is advisable to think about masking the wiring from the TV before installing it. Necessary:

1. It is good to think about and plan the placement of the TV.
2. Decide how to disguise the cords.
3. Calculate the amount of cable to connect.
4. In accordance with the plan and the general interior, determine the locations for sockets and cable outlets.
5. Please note that cables and wires from the TV must be freely connected to the connectors and not be strained.
6. Choose high-quality cable products so that you do not have to replace them soon.
7. Decide on the type of bracket. They are fixed, inclined, movable and ceiling-mounted. Movable mounts are considered universal, allowing you to change the position of the TV as you please. It is important to consider the mounting location on the TV and its reliability.

into the wall

Placing wires from the TV inside the wall is the most effective method of camouflage, but requires competent technical execution. In addition, it can only be implemented if the premises are planned for renovation.

• The cable from the TV can be removed from the concrete wall after gating. First, they outline the wiring layout, designate the exit and entry points, sockets, boxes, and then lay channels to the size of the cables using a hammer drill.

• It is much easier to install hidden wiring in a plasterboard wall. Markings are drawn on the wall with the location of the TV, socket and cable outlet. Cut out holes for sockets and outlets. A nut is tied to a nylon cord and launched behind the drywall from above. The cable is wound to the bottom of the cord with electrical tape and carefully pulled up. They put it in place. Instead of a cord, you can use wire.

When placing the wire from the TV inside the wall, you need to remember:

1. The minimum distance from electrical wiring is 10 cm.
2. To avoid damaging existing hidden wiring, use a wire detector in the wall.
3. When laying a cable with subsequent termination, the cable must be placed in a special protective channel.
4. To facilitate maintenance, wires should be labeled with descriptions.
5. It is desirable that the installation channels run in vertical and horizontal directions.

In cable channel

Plastic panels are good for everyone:

• are inexpensive;
• flexible, which ensures a good fit even to a curved wall;
• easy to install (does not require gating);
• fireproof;
• can accommodate a whole bundle of wires - each is in its own channel;
• subject to cleaning;
• invisible on the wall if you choose the right color for the finish.

There are a lot of color options for cable channels. They differ in size, multi-channel, material, shape. Examples in the photo:

The panels are sold in pieces 2 m long. In order to hide the wire from the TV, you may need fittings: rotary and corner inserts, plugs, socket module, wall mounts.

You need to decide where and how the cable channel will run on the wall, and then calculate the amount of material and necessary fittings.

For installation, the cable channel is disassembled. The bottom panel is fixed to the wall. Fasteners are selected depending on the type of wall. For fastening to drywall and wood, self-tapping screws and butterfly dowels are used. On some types of finishes, the panel can be attached with double-sided tape or liquid nails. The strip is fixed to the wall, the wire(s) are placed inside and the top cover is closed.

To the floor

Wires from the TV can be partially hidden in the floor. For this purpose, special skirting boards with a recess similar to cable ducts are installed. They are installed the same way. After installation, the top panel is removed and the cable is laid in the resulting space. You can place from 1 to 5 wires inside the baseboards.

This method is well suited for cases where the TV is hanging on a plasterboard wall. The wire from under the drywall is directed directly into the baseboard.

To furniture

In cases where the TV is placed on a stand or table, you can quickly and easily hide the wires by securing them to the back wall. The cords are nailed down with a construction stapler in several places.

A lonely TV hanging on the wall can be complemented with furniture. There are many options for walls, hanging structures with a niche. Today, furniture with space for appliances is thought out for the little things. Most manufacturers equip products with special moves on the back side. You can cover the wires in them without resorting to chipping the walls and damaging the finish.

Examples in the photo:

In the box

For the TV to work, you need at least two wires - an antenna cable and a cable for power supply from the electrical network. But often users use modern technology to the maximum. Then the number of wires increases. A cable from the Internet and set-top boxes, TV receivers, Hi-Fi speakers, and possibly something else are connected to the TV. It turns out to be a whole bunch of wires. In order to hide all this disgrace, you can use a box.

You can make the box yourself from plasterboard and metal profiles or hang a ready-made cabinet. It is advisable to tidy up the wires and secure them with nylon ties. Often this method is combined with placing the cable in the wall and floor.

Wires as an interior detail: 4 ways to decorate

Recently, designers have begun to offer interiors where wires are used as an effective decorative element. First of all, decorative design is appropriate for a loft-style interior. Examples in the photo:

Wires are used to create geometric shapes, outlines of cities, people, animals, and create imitation tree branches.The method of masking wires through decoration can be very inexpensive and quite aesthetically pleasing if the lines are maintained correctly. But you need to take into account that it is unsafe if there are pets and small children at home.

However, it is recommended to protect the wires from accidental damage. Decorative panels and silicone pads are used for protection.

Plant branches

The most popular and easiest to implement idea for decorating wires. The wires are attached to the wall using double-sided tape or other fasteners so that they look like tree branches. Using vinyl stickers, you can create an imitation of foliage, flowers, berries, and a bird's nest.

Disguising the wire on a large tree silhouette looks even more aesthetically pleasing. The cable is secured over the sticker. On a black background it is almost invisible, and in general the picture on the wall under the TV looks stylish.

Silicone pads

In large construction stores, as well as on Aliexpress, you can purchase special silicone linings for masking wires. They are fasteners decorated to look like leaves of trees and birds. Some sets have the form of silicone tubes resembling branches. Examples in the photo:

Twisting

If the wires are long enough, you can twist them into a spiral or decorative coils. Idea in the photo:

The twisted cable may be behind furniture or a decorative panel.

When choosing elements for fixing twisted wires, it is important to pay attention to the seat, which must correspond to the diameter of the cable (bundle).

A cheap alternative to clamps is plastic cable ties. They come in transparent and different colors. When twisting the wires, it is important that they are not pinched or crushed too much.

Decorative panels

You can diversify the interior and at the same time hide the wires on the wall from the TV using decorative panels. They can be carved, grooved, matte, of different sizes and shapes. It is recommended to give preference to panels made of fire-resistant plastic or rubber.

It is important that the decorative panel is in harmony with the decoration of the room, furniture and style as a whole. If necessary, holes are drilled at the top and bottom of the frame for wires, and then mounted on the wall under the TV.

Questions and answers

What rules must be followed when masking a TV cable?

It is not recommended to bend wires or place them in places where they can be easily damaged. If the outer shell is deformed, the damaged area must be replaced or soldered. Otherwise the signal may deteriorate. If the cable length from the receiver to the decoder is 40 meters or more, a signal amplifier is installed. You should study the safety instructions when working with electrical equipment. First of all, installation must be carried out with the equipment turned off, using a tool with protective handles.

In what cases can you not do without gating?

It is necessary to trench walls or floors if numerous cords and cables stretch across the entire apartment, and it is impossible to decorate them safely. It is often impossible to do without gating if there are children and pets at home. You need to remember that they can get to the wires, even if they are hidden behind panels.

Of all the possible ways to disguise TV wires, hidden wiring in the wall or floor is considered the most technologically advanced and relevant today. Not everyone can beautifully decorate a cable, and various boxes and cable channels are often not absorbed into the interior. TV antenna cords are especially difficult to hide.It can pass through the entire apartment due to the fact that the receiver only catches a high-quality signal in a certain place.

The wires hidden in the wall will not be chewed by a cat, and no one will accidentally touch them with their feet. All of them will be connected into a single console with the necessary outputs. It is not necessary to ditch the entire wall. You can stretch the cables to the baseboard and hide everything you need in it. If the room has already been renovated, you will have to use alternative methods. Each of them has its own pros and cons. You need to think carefully about everything before making a choice.