Review of anti-rust products in the bathroom: which will help clean off even old and stubborn yellow stains in 3 minutes

White color is associated with purity and sterility. The smallest particles of dirt, rusty streaks and puddle spots are visible on the white. If they are not there, taking a bath is a pleasure. Now about the unpleasant stuff. It is more difficult to remove rust from a bathroom than from a toilet. When treating with bleach you have to breathe in caustic fumes.

Aggressive means spoil enamel and acrylic, and traditional methods often do not work. Fortunately, not everything is so hopeless. You can get rid of rust in the bathtub in 3-5 minutes. We will tell you in detail how to do this safely and correctly.

Causes of rust on the bathtub

It’s hard to imagine plumbing fixtures without rust (but I would like to). It appears wherever there is moisture, metal and oxygen.

Rust forms when iron reacts with oxygen in the presence of water or moisture in the air.

Many people mistakenly believe that if the bathtub is acrylic and the faucet is plastic, yellow stains will not appear. We have to disappoint. Tap water contains iron oxides. Sooner or later they lead to the appearance of a red coating on the white walls. The higher the content of the element, the faster the bath takes on an unkempt appearance.

The appearance of rust is also promoted by:

• old cast iron and steel pipes in the apartment and house;
• rusty tap;
• accumulation of water in the bath (in hollows, grooves, enamel pores);
• high humidity in the room;
• draining water (faulty tap);
• foreign objects: hoses, basins, silicone mats, etc.;
• improper care of the bathroom.

The last factor is decisive. Some housewives go too far in their quest to remove rust from the bathroom. They use aggressive chemicals that, along with plaque, destroy the coating. The surface of the bathtub becomes rough, and rust forms much faster.

Proper care of your bathroom is the key to its cleanliness and long service life.

Features of cleaning surfaces made of different materials

Methods and products that are ideal for enameled cast iron can destroy acrylic. And vice versa.

You should always take into account the characteristics of the material you are going to clean.

• Acrylic. Polymer material (polymethyl methacrylate). Special products are produced for the care of acrylic bathtubs. Acrylic is quite gentle and does not tolerate the use of concentrated alkalis, acids, ammonia, chlorine, and acetone. They leave stains and dull the surface. Also, do not clean the material with metal sponges or hard abrasives. Acrylic is scratched.
• Enamel. Glassy mass, resistant to chemical attack. Theoretically, enamel baths can be cleaned with bleach, acids and alkalis. But in practice, enamel is often damaged by caustic substances - it becomes rough and porous. Enamel is more difficult to scratch than acrylic. It can be cleaned with brushes and soft abrasives.

It is recommended to do some testing before using a new rust remover. Apply the mixture to an inconspicuous place (for example, the edge of a side wall), leave for 15 minutes and rub.

If there are scratches on the surface and the gloss will come off, the bath cleaner is not suitable. Leave it for cleaning the toilet, and choose a different composition for the bathroom.

Cleaning rust: traditional methods

It must be admitted that household chemicals are a relatively recent invention of mankind. Previously, improvised means were used to combat rust. It worked out cheaper. But the effect was not much different. “Ancient” household products coped with their task noticeably worse than modern ones.

In the last 10 years the situation has changed dramatically. Today, using household chemicals is more profitable than using traditional methods, and it copes with rust much better.

Home remedies are good only in cases where nothing else is at hand, or there are small children and allergy sufferers in the house.

We advise you not to wait for the “wow” effect. He won't be there. Traditional methods can only cope with fresh plaque. If you are a fan of environmentally friendly methods and the rust is old, it is better to take a closer look at a cleaning stone or use a steam generator (more details below).

Baking soda and citric acid

Baking soda and citric acid are often used to clean the house. They are in every home and cost pennies.The alkali contained in soda softens plaque. And citric acid reacts with it. Carbon dioxide is released. The rust separates from the walls and can be easily washed off.

How to clean a bathtub from rust using baking soda and lemon:

1. Pour 100 g of soda (half a pack) into a convenient container.
2. Pour 50 ml of water, stir lightly.
3. Take a sponge and rub the walls and bottom of the bath well.
4. Wait 10-15 minutes.
5. Dissolve 30 g of citric acid (2 heaped tablespoons) in a glass of warm water.
6. Soak a sponge in an acidic solution and apply it over the soda. A violent reaction will begin. The solution will fizz and bubble. You need to rub the rust well.
7. At the end, all that remains is to rinse the bath with clean water. The lemon and soda will disappear without a trace, and the walls will shine with cleanliness.

Even though the ingredients are harmless, cleaning must be done with rubber gloves!

Baking soda and lemon dry the skin and can cause irritation (redness, tingling).

Cleaning gel made from laundry soap

It takes quite a long time to prepare, but the result is worth it. The home remedy has a gel-like consistency. The gel spreads well over the walls of the bath. It can be used to clean acrylic, enamel, and metal. To remove rust you need:

1. Grate 1 bar of laundry soap on a coarse grater.
2. Add a glass of water.
3. Place the container in a water bath.
4. Squeeze the juice of 2 lemons and pour into the heated mixture. Lemon juice can be replaced with 2 tbsp. spoons of citric acid.
5. Mix well. Remove from steam bath.
6. Add 3 tbsp. spoons of glycerin.
7. Add 1 tbsp. spoon of vodka, stir.
8. Distribute the gel over the surface of the bathtub.
9. After 15-30 minutes, lather well and rinse with hot water.

The product can be stored in a closed jar for up to a month.

Vinegar and hydrogen peroxide

To whiten yellowed plaque, prepare the following solution:

• 100 ml table vinegar (6-9%);
• 30 ml hydrogen peroxide.

The solution is distributed throughout the bath and then wait 15 minutes. Rub the surface with a brush and wash everything off. You can additionally sprinkle the walls with soda or washing powder. This way the rust will come off faster.

Attention! When using vinegar, you need to open the doors, turn on the hood, and wear gloves.

Toothpaste

The following method is often used by owners of acrylic bathtubs. Toothpaste gently cleanses the surface. It copes well with fresh yellow plaque and dried dirt. It is enough to apply the paste for 3-5 minutes and rub everything with a brush. Usually it is used to clean drains and small drips. Cleaning the entire bathtub with toothpaste turns out to be expensive.

Soda and liquid soap

Baking soda in combination with liquid soap removes yellow discoloration better. Thanks to its creamy consistency, the home remedy spreads easily over the walls of the bathtub.

You need to pour 4 tbsp into a bowl. spoons of baking soda, add 2 tbsp. spoons of liquid soap or shampoo.

The pulp is mixed and rubbed onto contaminated areas. After 15 minutes, lather with a brush and rinse off.

Sorrel

The old way. Previously, sorrel was used to clean bathtubs from rust in villages. You need to cover the bottom of the tub with fresh leaves, add a little water and rub the mass with a stiff brush to release the juice. Add water to the top. In the morning, remove the sorrel and wash the bath with soap and a brush. She will become snow-white!

The easiest way to remove rust in the bathroom

To clean rust, you don’t have to use household chemicals or even home remedies! You can remove it with plain water and... a steam generator!

Modern housewives use a steam generator to remove rust, limescale, and mold.The narrow nozzle is convenient for processing seams and crevices. See for yourself how well steam removes yellow plaque:

Choosing a product in the store

The range of bath cleaning products is not just large, but huge. Conventionally, they can be divided into 2 groups:

• Based on chlorine (sodium hypochlorite). Such products are suitable exclusively for enamel baths. They whiten well, but can damage the surface. They have a pungent, suffocating odor. Apply only with gloves.
• Based on acids, surfactants (surfactants). The products cope well with all types of contaminants. Caustic, but does not emit fumes like bleach. In moderate concentrations, they do not damage acrylic and enamel.

The shape of the bathroom is not very convenient for washing. Therefore, the convenience of applying cleaning compounds is of great importance. In the store you can find:

• Liquid anti-rust products. The most affordable and the most inconvenient to apply. The liquid quickly flows from the walls of the bathroom and rushes into the drain. You need to cover it with something and spread the product well over the entire surface.
• Gel-like. Gels adhere better to the walls of the bath than liquid rust removers. True, they cost a little more. But they are spent more economically.
• In sprays. The most convenient option to apply. The product can be quickly and evenly distributed over the entire surface of the bath. However, comfort does not guarantee quality. The composition must be effective.
• Dry powders. Many people underestimate them. But in vain. Powdered cleaners sometimes work where other products fail.They not only whiten the bathtub, but also remove rust mechanically.

"Sarma Anti-rust 7 in 1"

A very popular bathroom cleaner. Does not contain chlorine. The smell is tolerable. Inside the bottle there is a bluish liquid that neutralizes the red tint in 5 minutes. You can’t leave the product on for longer, otherwise your bathroom will turn from snow-white to blue. Approximate price – 125 rubles. per 750 ml bottle.

"Sanox for plumbing" (green, 1.1 l)

It is considered one of the most effective remedies against rust in the bathroom. Contains citric, oxalic acid and surfactants. Effective immediately. Rust, limescale, and water stone dissolve before our eyes, even if they are very old. The smell is acceptable. The downside is that the product can corrode the enamel over time. You need to use Sanox rarely and keep it on the surface for no longer than 5-10 minutes. The average cost is 95 rubles.

"Pemolux soda 5 EXTRA"

Many people write in reviews that this is the best rust remover for the bathroom - cheap, effective, easy to use. The manufacturer assures that Pemolux is suitable for cleaning absolutely any surface, as it does not contain aggressive chemicals. The active ingredients are active oxygen, soft abrasive and soda.

The average price for Pemolux soda 5 EXTRA is 70 rubles. There are 480 g of powder in a jar. It is enough for about 5 bath cleanings. To get rid of rust, you need to moisten the bath with water, sprinkle with powder and rub with a brush. Leave for 15 minutes. Brush again and rinse off any remaining cleaning product with hot water.

"Bagi Akrilan"

Detergent for acrylic bathtubs in spray form. Acrylan is easy to apply. The rust in the bathtub brightens before our eyes. Despite the relative high cost (400 rubles for a 400 ml bottle), many housewives praise it very much.When using Acrylan, acrylic bathtubs retain their original appearance for many years. But you need to keep in mind that the product has a pungent odor. Cleaning the bathtub should be done with gloves on while the hood is running.

"Cinderella for acrylic bathtubs"

Budget detergent, costing 60 rubles. per bottle 250 ml. Consists of surfactants and acids. Cleans acrylic from rusty deposits without damaging it. Can also be used for enamel bathtubs and cleaning any sanitary ware. "Cinderella for acrylic baths" is a transparent gel. Dissolves various types of contaminants in 10 minutes. The smell of the gel is not strong, but quite specific.

Universal stone

Innovative product. The universal stone is completely environmentally friendly. You can wash everything with it: dishes, bathtub, toilet, floor, windows, shoes and even a car. It contains only soap flakes, glycerin, clay, vegetable oils and green soap. The stone smells like clay and is used very economically - it replaces 50 liters of detergent. Suitable for cleaning any surfaces: enamel, metal, glass, ceramics, acrylic, plastic.

At first, the universal stone looks like a dense paste, and later hardens. Rub it with a damp sponge until a thick foam forms. This foam easily removes grease, carbon deposits, limestone, rust and any other contaminants. The cost of a small jar of 140 g is 360 rubles.

It is recommended to use the universal stone without gloves. The components of the detergent nourish the skin of the hands and strengthen the nails.

How to remove rust - step-by-step instructions

The rusty coating eats into the surface. The longer it stays on the walls, the harder it becomes. If you don't know how to remove it, use the step-by-step instructions.

How to clean rust in a bathroom:

1. It is recommended to wet the bath before applying any product. The composition will be better distributed over the surface, and aggressive substances are less likely to damage the coating.
2. Wear rubber gloves.
3. Fresh plaque can be removed with baking soda and a kitchen sponge (hard side). This cleaning is recommended before bathing infants and allergy sufferers. Scrub the rust and then rinse the tub with hot water.
4. If the rust is old, it is better not to waste time and energy on traditional methods. Use a store-bought product based on acids and surfactants. Spread it over the entire surface and leave for 5-10 minutes.
5. Scrub the rust with a brush or sponge.
6. Rinse the bathtub with clean water.
7. If rust remains, repeat the treatment.

Here's how to get rid of rust in an enamel bathtub:

1. Pour 250 ml of “Belizna” and 250 ml of water into a 0.5 liter bottle.
2. Close the lid with a spray bottle.
3. Mix in a circular motion.
4. Spray the bath well.
5. Leave overnight.
6. Rub the contaminated areas with a brush or sponge with laundry soap.
7. Rinse the bathtub with warm water.

What not to do and why?

Seeing severe rust in the bathroom, housewives often “overdo it.” The result is that the surface becomes rough and the gloss peels off. Dark spots may appear on acrylic and the enamel may chip. We advise you not to repeat the following mistakes:

1. Use bleach, acetone, or ammonia to clean the acrylic bathtub.
2. Mix cleaning products for greater effectiveness.
3. Increase the exposure time to the composition specified in the instructions.
4. Rub the rust with a metal sponge.
5. Use chemicals not intended for cleaning bathtubs.

Anti-rust bathtub care tips

Once you start properly caring for your bathroom, rust will appear several times slower. It is enough to follow 5 basic rules:

1. Wash the bathtub with a cloth every time after use.
2. Wipe dry.
3. Prevent water from draining (repair the faucet).
4. Remove hoses, chains, silicone mats and other foreign objects.
5. Use gentle cleaning products.

Additional recommendations:

• Install a filter that removes iron oxide from water.
• Improve ventilation in the bathroom (for example, by installing a fan in the hood).
• Renovate an old bathroom. On a new coating, yellow spots form 5-7 times slower.

Questions and answers

Why can't anything remove rust?

This can happen if the surface is severely damaged. On acrylic, yellow marks can appear from chemicals and hair dye. When the enamel is damaged, cast iron rusts. Rust is very difficult to remove from rough surfaces.

What to do with a “hopeless” rusty bathtub?

There are two options: replace or restore. Liquid acrylic is used for restoration. An acrylic liner can be inserted into a cast iron bathtub. The work is complex, and not everyone can do it at home. It's better to contact specialists.

Let's summarize. Cleaning your bathroom from rust will take less time if you follow preventative measures. You need to choose the right cleaning product depending on the type of surface. If it is acrylic, it is important that the jar is marked “suitable for acrylic bathtubs.” Enamel is less demanding, but it is still better to avoid concentrated chemicals or use them as little as possible.

There are many effective products in stores: “Akrilan”, “Sanox”, “Sarma Anti-Rust”, “Pemolux” and others.You can choose any of the funds discussed above, and you won’t go wrong.